3-PT 15 3-Point Ditcher

Product Description

The model 3-PT 15 3-Point ditcher is designed to provide an economical way to make surface drainage ditches using your own farm tractor.  Like all Hurricane 3-Point models, the 3-PT 15 is equipped with parking stands for easy hook-up and disconnection. It can be used with Cat II or III quick hitch by moving the bushings to the desired location.

The 3-PT 15 has a 15″ 5-paddle impeller (digging wheel) with hard-surfaced paddles that are designed to be resurfaced as they wear.  An optional ripper tooth is available for running in extremely hard or rocky conditions.  The optional deflector shield allows soil to be placed 4′ to 8′ from the machine to build a diversion or small terrace.  The deflector shield can also be used to fill ditches washed along outer edges of waterways.

The rear shoe (dragplate) gives the machine stability, helps prevent gouging, and helps form the ditch in loose or wet conditions.  A heavy-duty ratchet jack is standard for adjustment of the dragplate.

The gearbox components are easily accessible by removing the top or side cover plates.  The gearbox consists of large shafts, heavy-duty sprockets and bearings, and double 80 roller chain; all enclosed and running in an oil bath.  The external idler adjustment is used to maintain proper chain tension.

Soil is thrown out the left side of the ditcher and may be distributed over a 50 foot area; rocks and other debris may go farther.

Depth of cut:  up to 10 inches in a single pass and up to 16 inches in multiple passes with standard 15″ 5- paddle impeller; up to 20 inches in multiple passes with optional 20″ 6-paddle impeller.

Options for the 3-PT 15:  20″ 6-paddle impeller; ripper tooth; deflector shield; 540 RPM PTO.

PTO Details

• Standard – 1-3/8-21 spline, 1000 RPM
• Optional – 1-3/4-20 spline, 1000 RPM
• Optional – 1-3/8-6 spline, 540 RPM

Specifications

• PTO – 55 series PTO with shear bolts which overload at the tractor end
• Gearbox – 5/16″ material with double 80 roller chain, oil bath, external idler tension adjustment
• Impeller wheel – 15″ diameter with 5 paddles; optional 20″ diameter with 6 paddles
• Hitch – Cat II or III quick hitch adaptable
• Weight – Approximately 800 lbs. without optional components; approximately 1,050 lbs. with optional components
• HP required – 50 HP to 140 HP

Availability